Still image camera settings
There are two kinds of settings for the still image camera:
Image setup
and main settings. To adjust
Image setup
,
see ‘Setup settings—Adjust color and lighting’, p. 23. The
setup settings return to the default settings after you
close the camera, but the main settings remain the same
until you change them again. To change the main settings,
select
Options
>
Settings
and from the following:
Image quality
—
Print 3M - Large
-Large (2048x1536
resolution),
Print 2M - Medium
(1600x1200 resolution),
Print/e-mail 0.8M - Small
(1024x768 resolution), or
Multimedia message 0.3M
(640x480 resolution). The
better the image quality, the more memory the image
consumes. If you want to print the image, select
Print 3M
- Large
,
Print 2M - Medium
, or
Print/e-mail 0.8M -
Small
. If you want to send it through e-mail, select
Print/
e-mail 0.8M - Small
. To send the image through MMS,
select
Multimedia message 0.3M
.
These resolutions are only available in the main camera.
Add to album
—Select whether you want to save the image
to a certain album in the gallery. If you select
Yes
, a list of
available albums opens.
Show captured image
—Select
On
if you want to see the
captured image after it is taken, or
Off
if you want to
continue taking pictures immediately.
Default image name
—Define the default name for the
captured images.
Extended digital zoom
(main camera only)—Select
On
to
allow the zoom increments to be smooth and continuous
between digital and extended digital zoom. If you want to
limit the zoom to where the selected image quality is
maintained, select
Off
.
Capture tone
—Select the tone you want to hear when you
take a picture.
Camera
23
Memory in use
—Select where to store your images.
Restore camera settings
—Select
OK
to return the default
values to the camera settings.