Pair devices
To open the paired devices view (
), in the
Bluetooth
application main view, press
.
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
Options
>
New paired
device
. Devices with Bluetooth wireless technology within
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
Connections
96
on the other device as well. After pairing, the device is
saved to the paired devices view.
Paired devices are indicated by
in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select
Options
, and from the following:
Set as authorised
—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust.
indicates
authorized devices in the paired
devices view.
Set as unauthorised
—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options
>
Delete
. If you want to cancel all pairings, select
Options
>
Delete all
.
Tip! If you are currently connected to a device and
delete the pairing with that device, pairing is removed
immediately, and the connection to the device is
switched off.