Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When
is shown in the standby mode, Bluetooth
connectivity is on.
• When
is blinking, your device is trying to connect
with another device.
• When
is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, open
Notes
, write the text, and select
Options
>
Send
>
Via
Bluetooth
.
1
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open
Gallery
.
2
Select the item and
Options
>
Send
>
Via Bluetooth
.
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons:
computer,
phone,
audio or
video device, and
other device.
To interrupt the search, select
Stop
.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See ‘Pair devices’, p. 95.
5
When the connection has been established,
Sending
data
is shown.
The
Sent
folder in
Messaging
does not store messages
sent using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.